WSPR Beacon for Ham Radio
The first and only app allowing WSPR transmission using your Android device!
The WSPR Beacon App is made to send WSPR signals using your Android smartphone/tablet as a signal source. All you have to do is use the audio out of it and pair it with the audio in of your rig (and set it to VOX).All you ha to do is:1) Set your CALLSIGN2) Set your LOCATOR or press the GPS button and have the app automatically calculate it based on your position. Please allow a few seconds for the GPS to get exact coordinates.3) Set the POWER LEVEL so that it matches your rig output power4) Select the BAND (optional). This is only to have handy the frequency value to set on the rig.5) Set the TX FRAMING. This allows you to set how ofter the WSPR will be sent. By default the WSPR is sent only once.6) Select the BASE FREQUENCY. It can go from 1400Hz to 1600Hz and by default it is 1500Hz7) Press STARTThe app will wait for the next frame start before sending.So you only have to make sure that the clock of your smartphone/tablet is synced.By pressing the REPORTS button you can monitor, filter and share reception reports. By pressing the MAP button, the app will open the related WSPRnet.org map page to view reports.For any support or suggestion please visit the website: http://alphapapacharlie.comor send an email to [email protected]/73, Andrea IU4APCv6 (17db):- added SORTING to reports view- fixed view on tablets- personal info should be retained on all the devices now
The WSPR Beacon App is made to send WSPR signals using your Android smartphone/tablet as a signal source. All you have to do is use the audio out of it and pair it with the audio in of your rig (and set it to VOX).All you ha to do is:1) Set your CALLSIGN2) Set your LOCATOR or press the GPS button and have the app automatically calculate it based on your position. Please allow a few seconds for the GPS to get exact coordinates.3) Set the POWER LEVEL so that it matches your rig output power4) Select the BAND (optional). This is only to have handy the frequency value to set on the rig.5) Set the TX FRAMING. This allows you to set how ofter the WSPR will be sent. By default the WSPR is sent only once.6) Select the BASE FREQUENCY. It can go from 1400Hz to 1600Hz and by default it is 1500Hz7) Press STARTThe app will wait for the next frame start before sending.So you only have to make sure that the clock of your smartphone/tablet is synced.By pressing the REPORTS button you can monitor, filter and share reception reports. By pressing the MAP button, the app will open the related WSPRnet.org map page to view reports.For any support or suggestion please visit the website: http://alphapapacharlie.comor send an email to [email protected]/73, Andrea IU4APCv6 (17db):- added SORTING to reports view- fixed view on tablets- personal info should be retained on all the devices now
Read trusted reviews from application customers
Does not receive
A while back I was convinced that the app was not sending wspr but I can only admit that it was a premature error. It is excellent and very useful for portable ops.
Really cool. Re-igniting my interest in ham radio
Exceptionally easy to use I put a video on YTube called "WSPR Beacon on KX3" using just a stereo Cable, enjoy. Using for six years G4LHT-V31HT
Outstanding
This is great! I just installed this on my phone, connected the Wolphi-Link between my phone and a Yaesu FT-857d and let it start sending out beacons. I'm being heard on both coasts of the USA from my location in East Texas, as well as Hawaii, Iceland, and Brazil! I wish it could receive as well, but I'm thrilled with what it does.
Very good app, ideal to check the bands whilst /pm.
I don't use this App very often, but it works very well. I use it more often to monitor my WSPR signals sent from my home QTH.
works well. using on old sprint tablet with android v5
It sees that I have a radio attached, an Icom 7300 but it will not transmit.